MP1288 MIDI WIZARD PEDAL

The Midi Wizard is a programmable device for sending midi program change information and eight channels of controller data from analog inputs. It is mappable by programming up to seven more program changes along with the number in the display. Also, the display can be set for 0 to 127 or 1 to 128 counting for compatibility with different equipment. The LED display shows the midi program change number and will go through all the 10's digits then start over as the Up or Down switches are pressed. Features include

• decimal format
• 12 buttons in 2 rows
• 8 controller jacks for 0-5 volt inputs or resistor pots
• controllers can each be programmed for any number on any channel
• phantom powerable
• and midi in with merging.
  

• ---

MP128P MIDI BUDDY PEDAL

The MP128 is a controller for sending midi program change information on any of the 16 midi channels. This is done in 10's and 1's or it can be thought of 12 banks of 10. The 2 digit display shows the midi program # when the decimals are on it means the number is greater than 100. The MP128 will also send midi start, stop and song select information extending the flexibility of any midi controlled device. The LED display on the MP128 shows the midi program number (01-128) and will go through all the 10's digits then start over as the up or down switches are pressed