Synthony Music's Synth & Midi Museum

Evolution UC-33

The Evolution UC-33 is the affordable hardware controller, designed to be used with any computer music/MIDI setup. In fact, the UC-33 allows instant and simultaneous control of up to 47 different parameters, and with 33 memory locations, changing its setup is fast and easy. With its compact and intuitive design, the UC-33 fits into any studio, regardless of size. The UC-33 puts the power of music software in your hands.

		24 fully assignable rotary knobs
		9 full-size assignable faders with light indicators
		Select any of the 33 memory locations, reassign a controller to a different parameter or simply check how the existing setup is configured via the programming keypad
		4 assignable buttons provide fingertip control over Transport and other sequencer functions
		Selector buttons provide one button access to the 4 most frequently used program setups
		Multi-purpose LCD display shows Controller assignments
		Drawbar mode reverses the polarity of the 9 assignable faders. Great for realistic control of those classic organ sounds
		10 button numeric keypad which is also fully assignable
		Snap Shot sends out current controller position data and sets your synths controls to the current UC-33 setting

Using the UC-33 with Software and Plug-ins
Using controllers should be easy but it often isn’t. Even just setting up patches that actually work with a setup can be complicated and frustrating, not to mention the headache of having to remember which knob controls what parameter. These problems experienced with many controllers can actually defeat the whole purpose of using one in the first place! In an ideal world, using a controller should require zero effort.With the UC-33, it really is that simple.

The UC-33 comes with 33 pre-configured presets allowing instant control of the most popular virtual instruments and host applications, ranging from Cubase SX to Propellerhead Reason to Native Instruments B4. Overlay templates are included allowing you to quickly transform the UC-33 from a synth controller to a mixer.

UC-33 and Reason
These two were destined to be together. Controlling Reason with the UC-33 couldn't be easier as the UC-33 comes with presets for the Malstrom, Subtractor, ReDrum, Dr.Rex, NN-19 and the Mixer.

UC-33 and Cubase SX
One hell of a combination. The UC-33 gives you powerful hands-on control of Cubase SX with presets built-in saving you a huge amount of work.

Creating your own Setups
All assignable real-time controllers are easily programmed with the numerical keypad. Select a controller, type in a MIDI cc number and the job is done. Each of the UC-33’s 47 controllers can also be programmed to transmit on individual MIDI channels and even transmit pre-programmed Sys-Ex messages. Once completed, your setup can of course be stored in any of the 33 memory locations for recall whenever you need it.

The UC-33 Live
The UC-33 can of course also be used with a conventional MIDI setup, for live performances or as a remote controller for your existing studio rack. The MIDI Out not only acts as an output for data from your computer system, but used stand-alone the UC-33 sends MIDI controller data straight from the MIDI Out to your MIDI rack. Even complex live setups are easy to control from a single unit due to the UC-33’s powerful programming features.

USB and MIDI Interfacing
The UC-33 can also be used as a USB MIDI interface. The MIDI input and output interfaces directly with your host application adding an extra MIDI interface to your setup. For live applications, simply connect the MIDI Out directly to the device you want to control and power the UC-33 with an optional power supply.

SoundBlaster, XG and General MIDI Soundcards
It’s also possible to gain real-time access to parameters beyond immediate reach on XG and GM compatible soundcards due to the UC-33's pre-programmed Sys-Ex and RPN/NRPN messages. Try one of the factory patches and experience how the UC-33 breathes new life in to your soundcard.

Multiple U-Controls
In some cases, it makes sense to use multiple UC-33’s. For instance, you can have one unit controlling your mixer environment and one controlling your instruments. The UC-33 has been designed to operate perfectly alongside itself or any other Evolution controller.

Connection and Power
Connecting the UC-33 couldn't be easier. The included USB cable not only connects
the unit to your Mac or PC, it also provides the power so you don’t have to worry about a power adaptor. Also, to keep cable runs to an absolute minimum, the built-in MIDI interface allows you to connect your MIDI keyboard straight to the UC-33. So, forget that old MIDI interface, you don’t need it anymore!

Plug and Play
All Evolution controllers are Class compliant, so there's no need to waste time installing drivers when using Windows XP or Mac OS X. Simply plug and play.